Maschinen - Stanzbiegetechnik GesmbH

Forming, riveting and welding all in one.

Vision became innovation³

SBT production machines were originally designed as a link between the classic stamping machines and the stamping bending machines. They combine the advantages of both systems – the flexibility of the stamping machines and the short set up times or high mold service lives of the stamping machines. SBT machines are multi-functional production machines for the production of metal parts – contact welding included.

The compact all rounder

MiniStamper

Designed for simple stamping, bending and assembly tasks in the area of precision parts the Ministamper needs not more than three operating modules running in synchronization.

Kleine, kompakte Bauweise
Bis zu 3 Bearbeitungsmodule integrierbar
Zentrale Steuerung per Touch Screen
Dezentrale Antriebstechnik
Synchrone Servoachsen

product detail

The three-fold all rounder

MultiStamper

The Multistamper ideally combines versatility with rapidity and is designed specifically for the series production of expensive precision metal parts.

Breitere Plattform
Up to nine operating modules integrated
Zentrale Steuerung per Touch Screen
Modul- und Motoreinstellungen speicherbar
Dezentrale Antriebstechnik
Synchrone Servoachsen
Zahlreiche Zusatzfunktionen

product detail

The flexible production line

MultiLine

The Multiline is configured for complex tasks in the area of precision parts. Up to 15 operating modules can be positioned on the even wider contact plates (depending on the module width) – with just a few turns of the hand here as well.

Bis zu 15 Bearbeitungsmodule integrierbar
15 synchronous servo drives
2 servo stamping machines that can be integrated
Maschinensockel flexibel kombinierbar
Maschine ist jederzeit erweiterbar

product detail

The low-noise production line

MonoLine

The Monoline is a low-noise production line. Its clamping plate offers space for up to six modules working synchronously. Additionally a servo stamping machine can be integrated.

1,100 mm clamping plate
6 synchronous servo drives
1 servo stamping machine to be integrated
Inherent rigidity of machine frame to reduce vibrations
Flexible production line for complex tasks

product detail

Our modules

Bending

Bending module with four or six machining slides each with 24 kN machining force. The machining slides can be moved together or independently because the movement is determined by cam disks. Servomotor drives (for six slides with a chain link to the other bending shafts).

More information

Our modules

Gripper feeder module

Detachable material feed unit for setting up outside of the machine. Easy access to the mold. Infinitely variable feed length 0-80mm. Angle of feed can be reduced by up to 30°. Decentralized drive with energy saving servomotor. Material gripped by subsurface drive. Adjustable clamp ventilation (can be deactivated).

More information

Our modules

Threading module

Threads form from above and below, up to 150 threads/minute. Forward and backward movements at different speeds. Cam-controlled servo motor for reduced cutting speed and long service life of the thread former even at high stroke rates. Simply replace the thread former by pivoting the unit. Lubrication and cutting oil removal included.

More information

Our modules

Linear module

Radial modules strung linearly each with two or four or six machining slides (above and below together) as well as 24 kN machining force. For stamping, bending, assembly etc. at any angles.

More informationen

Our modules

Assembly module

For linking the processing modules through a linear or radial transfer system (revolving table). Rapid, cam-controlled sets of slides provide for precise bending assembly operations. Welding systems (resistance, laser), screwing stations and testing stations can be integrated between the feeder stations and the modules.

More information

Our modules

Riveting module

Integrated rivet feed (from left or right) for rapid set up through oscillating conveyors hanging or bottom up, single or dual. Sensor monitored riveting assembly (right/left) and counter pressing provide a good rivet connection to the carrier strip.

More information

Our modules

Pilot module

To position the tape in between the individual process steps. This is important with intermittent service of the press because none of the mold pilots are in use so the tape has to be repostioned again.

More information

Our modules

Radial module

Adaptations can be made at any angles using this module. A servo-controlled central wheel drive makes the movement; the working motions are cam-controlled.

More information

Our modules

Welding module

Different contact welding modules for various applications. For example, for welding at any angle to the carrier strip, from above and below, horizontally or vertically. For round wire, profile tape contacts, dual contacts or lamina. Right or left drive.

More information

Our modules

Stamping module

Stamping module with two or four machining slides and each with 24 kN machining force. The machining slides can be moved together or independently because the movement is determined by cam disks. Servomotor drives.

More information